Chain link fence panels provide secure fencing for many uses. BMP, a trusted name, offers a range of 6×12 chain link fence panels. These panels meet your security and enclosure needs well. In this article, we will look at the specifications, customization options, and uses of 6×12 chain link fence panels. We will highlight their versatility and importance.
How to Build Chain Link Fence Panels
Building chain link fence panels can seem challenging, but with the right tools and steps, you can do it yourself. Follow this guide to create sturdy and reliable fence panels.
Materials Needed:
- Chain link fabric
- Steel posts
- Top rails
- Tension bars
- Tension bands
- Tie wires
- Post caps
- Fence ties
- Gravel and concrete (for post holes)
Tools Needed:
- Measuring tape
- Level
- Post hole digger
- Shovel
- Wrench
- Pliers
- Wire cutters
Steps to Build:
- Measure and Mark: Measure the area where you want to install the fence. Mark the locations for the posts, ensuring they are evenly spaced (typically 8-10 feet apart).
- Dig Post Holes: Use a post hole digger to dig holes for the posts. Each hole should be about 30 inches deep and wide enough to hold the posts steady.
- Set Posts: Place the posts into the holes. Ensure they are level and straight. Fill the holes with gravel and then concrete to secure the posts. Allow the concrete to set for at least 24 hours.
- Install Top Rails: Attach the top rails to the posts. This will form the frame for the chain link fabric. Use the connectors provided with the fence kit.
- Unroll and Stretch Chain Link Fabric: Unroll the chain link fabric along the length of the fence. Attach one end to a terminal post using tension bands and a tension bar.
- Secure Fabric to Posts and Rails: Stretch the chain link fabric tightly and secure it to the top rail and line posts using fence ties and tie wires. Make sure the fabric is even and without sagging.
- Attach Tension Bars: Attach tension bars to the end of the fabric and secure them to the terminal posts with tension bands. This will keep the fabric tight and secure.
- Finish and Inspect: Add post caps to the top of each post for a finished look and added protection. Inspect the entire fence to ensure it is tight and secure.
How to Connect Chain Link Fence Panels
Connecting chain link fence panels is straightforward. Follow these steps to ensure a secure connection between panels.
Materials Needed:
- Chain link fence panels
- Connectors or fence clamps
- Bolts and nuts
Tools Needed:
Steps to Connect:
- Align Panels: Place the panels next to each other. Ensure they are aligned correctly, with the edges of the panels meeting evenly.
- Attach Connectors: Use connectors or fence clamps to join the panels. Place the connectors around the meeting posts of each panel. Ensure the connectors are evenly spaced for a secure connection.
- Secure with Bolts and Nuts: Insert bolts through the holes in the connectors and tighten the nuts with a wrench. Ensure the connection is tight and secure to prevent any movement between the panels.
- Inspect Connections: Check the connections to ensure they are tight and secure. Make any necessary adjustments to ensure the panels are stable and aligned correctly.
Conclusion
Building and connecting chain link fence panels is a manageable project with the right tools and steps. By following this guide, you can create a secure and reliable fence for your property. Ensure to measure accurately, set posts securely, and tightly stretch the chain link fabric. Connecting panels correctly will provide a seamless and stable fence, meeting your security needs.
Understanding the Specifications
BMP’s 6×12 Chain Link Fence Panels are engineered with precision to ensure durability and security. Let’s take a closer look at their key specifications:
- Cross Brace Tube: These panels are equipped with a robust 1⅝” (41.2mm) cross brace tube, providing structural stability and strength.
- Chain Mesh: The chain mesh is crafted using 11-gauge wire, striking a balance between durability and flexibility.
- Mesh Dimensions: With a mesh pattern of 2-1⁄8”x2-1/8” (54mmx54mm), these panels offer optimal security while maintaining visibility.
- Height and Width: These panels stand at a height of 6 feet (1830mm) and span 12 feet (3650mm) in width, ensuring extensive coverage.
Customization for Diverse Needs 6×12 Chain Link Fence Panels
BMP recognizes that temporary fencing requirements can vary widely. Therefore, they offer a range of tube options to cater to your specific needs:
| Temporary Chain link Fence Tube optional |
| · 1¼” /1.250inch/32.00mm | · 16.5ga/1.50m |
| · 1⅜”/ 1.400inch/35.00mm | · 16ga /1.60mm |
| · 1”⅗/ 1.600inch/40.00mm | · 15ga/1.80mm |
| · 1⅝” / 1.625inch/41.20mm | · 14ga/2.00mm |
| · Cusotmized available | · Cusotmized available |
| Outer pipes | · Gauge of Pipe |
For those with unique project requirements, BMP also offers customized options to ensure a tailored solution.
Mesh Aperture and Wire Gauge Options 6×12 Chain Link Fence Panels
The mesh aperture size and wire gauge are critical factors that determine the fence’s strength and security. BMP provides a variety of options:
| Temporary Fence Chain Link Infill Mesh Aperture and Wire Gauge |
| ·2″x2″/(50mm x 50mm) 2¼”x2¼”(57mmx57mm) 2⅜”x2⅜”(60mmx60mm) 2½”x2½”(63mmx63mm) | 10ga/3.2mm , 10.5ga/3.00mm , 11ga/2.90mm, 11.5ga/2.75mm, 12ga /2.60mm 12.5ga/2.5mm 13ga/2.3m |
| Chain Link Mesh Aperture | Wire Gauge |
Robust Hot Dipped Galvanization
To ensure longevity and resistance to corrosion, all BMP Chain Link Fence Panels undergo hot-dipped galvanization. You can choose from different zinc coatings, including 1.2 oz/ft2 [366g/m2], 1.8 oz/ft2 [500g/m2], and 2.0 oz/ft2 [610g/m2], based on your preferences.
Varied Heights for Versatility
BMP offers chain link wire panels in various heights, ranging from 4 feet to 14 feet. These panels can be customized to meet your exact requirements, ensuring versatility in their applications.
| Construction Chain Link Fence Panels Height*Width |
| 4’/1220mm 6’/1830mm 8’/2430mm | 9.5’/2900mm 12’/3650mm 10’/3048mm 14’/4300mm |
| CUSTOMIZED AVAILABLE |
6×12 Chain Link Fence Panels Secure Fence Bases
The base of a temporary chain link fence is as crucial as the panels themselves. BMP provides robust steel bases in various sizes and finishes. These bases are designed for stability and are available in hot-dipped galvanized or pre-galvanized options, with a range of color choices after powder coating.
Reliable Temporary Fencing Clips
Securing your chain link fence panels is of utmost importance. BMP offers temporary fencing clips designed to fit different outer pipe diameters. These clips come in various thicknesses and finishes, guaranteeing a reliable and long-lasting solution.
In Conclusion
BMP’s 6×12 Chain Link Fence Panels are versatile and dependable, making them the ideal choice for various temporary fencing needs. With customization options, durable construction, and a wide range of specifications, these panels are well-suited for construction sites, events, or any scenario requiring temporary security. Secure your property effectively with BMP’s trusted chain link fence .
